• Send Us Mail adam@realstar-machinery.com

  • Call Us +86-577-66818108

RS-1060S ECONOMIC AUTOMATIC HOT STAMPING FOILING MACHINE

Feeding unit

1.Taiwan feeder with 4 suction cups for lifting & 4 suction cups for transfering ensures stable and fast paper feeding.

2.Preload device, non-stop feeding function, with Max pile height up to 1400 mm

3.Rail-guided preload device enables operators to move the prepared pile to the feeder accurately and conveniently.

4.Side layers can be shifted from pull layers to push layers to fit different formats.

5.Side and front layers are equipped with precise location aligning photocells with adjustable sensitivity.

6.Paper feeding will slow down when the paper is about to reach front lays to achieve a more accurate paper orientation.

7.German stainless steel brings you a smooth and quick paper conveyance.


 Die-cutting & hot stamping unit

1.Synchronous longitudinal & transversal foil feeding enables foil stamping at both direction, which reduces foil using and shorten replacing time.

2.Optional longitudinal axles can reach to 6 at most, which are controlled by Japan Yaskawa servomotor.

3.Operator-friendly retractable foil holders are suitable for foil with maximum diameter 250mm.

4.Both longitudinal & transversal blowers for paper stripping are available for facilitating big format foil stamping.

5.Human–computer interaction screen ensures a quick setting of foil feeding interval.

6.The machine alarms when the foil is shorter than 6 meters and the diplay shows the foil length left.

7.Cutting force is controlled by Japan Fuji servo motor to achieve accurate and stable die cutting controlling through touch screen. The cutting force adjustment is accurate to 0.01mm.

8.The chase and die cutting plate are automatically locked by SMC pneumatic cylinder; comparing to manual locking, this ensures much faster and sfter operation.

9.Centerline registering installation system of the chase ensures a convenient and fast assembly of cutting die.

10.By using special auxiliary tools, cutting dies of different sizes can be adopted to meet different task needs.

11.Grippers are structured in an adjustable type to ensure accurate paper registering.


 Delivery unit

1. Alternating current motor controlled delivery brake helps collect and align the paper.

2.You can also control each unit of the machine by using the 10.4’ touch screen at delivery unit.

3.Auxiliary delivery rack ensures non-stop delivery;

4.Servomotor controlled rear layers are applicable for paper with different sizes.

5.Synchronous belt is wear resistant and of long service life. 


Machine parameter

Max Sheet size 1050*750mm 
Min Sheet size 400*360mm  

Max.hot stamping foiling size 1040*720mm

Min waste side width 8mm

Max.die cutting force 300 TON

Paper size GSM Card Board:120~1500g/m2 

Corrugated Paper:≤4mm;Paperboard:0.1-3mm

Max. die-cutting speed 4500 SHEET/HOUR

Max. stamping speed 4000 SHEETS/HOUR

Heating zone 8 heating zones, temperature 20°-200°

Max. pile height at feeder 1300mm

Max. pile height at delivery 1000mm

Total power 34kw

Weight  8.5 TON

Overall dimension 4600*2250*1850mm

Air source 0.5~0.8MPa;600L/min

Welcome to our website. If you have any requests or suggestions,please feel free to email us at adam@realstar-machinery.com or use the following enquiry form. Please allow us to provide you with the best service.